Push Me Pull You

This is Tim Escobedo‘s Push Me Pull You. It’s an octave up with an interesting design. Using an NPN PNP pair.

Push Me Pull You

Push Me Pull You 2


Swollen Pickle

This is Way Huge Swollen pickle clone I made. This is basically a Big Muff with using a 14 pin DIP that contains 4 transistors. The tone control also has a pronounced mid scoop compared to the original Big Muff.

Swollen Pickle guts

I etched this design on the box. The design is based on flames in Tibetan art. I named the box the Shiva Sonic. I figure as the god of destruction and rebirth, Shiva was an appropriate deity for the sound of the Big Muff.

Shiva Sonic Box

This is a layout for the Big Muff that would fit in a B sized box. It is set up to use a 14 pin DIP since I used a quad transistor array. The pins on this chip are arranged such that you you could use this layout with regular transistors inserted into a 14 pin DIP socket. If you look carefully you can see that I’ve marked the pins E, B and C

Swollen Pickle Layout


1590 B Perfboard Template

This PCB board includes all of the wiring for DC jacks, Input and Output and 3PDT Stomp switch, and a perfboard area of 18 by 21. ThePCB board fits in 1590 B sized box with room for a 9V battery. 1590 B PCB Traces Here’s a picture of the PCB with Switch and jacks. img_3161.JPG Here’s a picture of the PCB fit into 1590 B box from the bottom. Leaves just enough room for a battery. 1590 B PCB Bottom View