Month: July 2007
-
Ugly Face simple blend mod
Here’s a simple mod that adds a blend pot to the Ugly Face.
-
Distort-o-Matic XI
This is an interesting distortion effect with an octave and wah like tone control. I redrew this schem from an issues of Stompboxology.
-
Punch In the Face
Here’s another unique design by Tim Escobedo.
-
Minibooster
This is Jack Orman‘s Minibooster.
-
FET Driver
This is Tim Escobedo‘s FET Driver.
-
Jinx
This is another fine little Distortion by Tim Escobedo. I think this sounds pretty good. The sound can go from mildly distortion/overdrive to over the top almost metal. It can also get some splatty fuzz tones and a soft attack.
-
Push Me Pull You
This is Tim Escobedo‘s Push Me Pull You. It’s an octave up with an interesting design. Using an NPN PNP pair.
-
Psychtar
Another very original design by Tim Escobedo. This an octave up with a sitar like sound.
-
Titan Boost/Octave
This is design by John Hollis. It’s a booster that uses an inductor to generate a massive boost. It also has a switchable octave up. The boost sound is very warm and clear. The octave has a nice tone also. There is a drop in volume between the octave and the boost, since the octave…
-
Swollen Pickle
This is Way Huge Swollen pickle clone I made. This is basically a Big Muff with using a 14 pin DIP that contains 4 transistors. The tone control also has a pronounced mid scoop compared to the original Big Muff. I etched this design on the box. The design is based on flames in Tibetan…
-
FET Muff
I just built up Jack Orman’s FET Muff. This is Big Muff built with FET’s instead of BJT’s. When I created the layout I had the idea that I would keep all of transistors in line so I could use a length of milmax header. I think this made for a better construction. It led…
-
MOSFET Boost
This is Jack Orman’s MosFET Boost. This was an easy build. It sounds good, great clean boost with a lot of gain.