Super-Freq

  • Pedal Building Workshop
    • Parts and Resources
    • PCB Projects
      • 22/7 by RunOffGroove
      • Build your favorite Big Muff
      • Flatline by John Hollis
      • Morbid Fur/Haunting Mids Fuzz
      • PWM Build
      • Silicon Tone Bender by Mic Tester
      • Smash Drive by Aron Nelson
      • UBE Screamer by RunOffGroove
      • Ugly Face
      • Vulcan Overdrive by Joe Davisson
    • Pedal Building Workshop
    • Pedals for Sale
  • Distort-o-matic VI

    Here’s a weird idea from the Stompbox Cookbook. Note, the PCB image is a positive.

    October 9, 2010
  • Taco Fry Fuzz

    Everyone’s favorite 5 knob fuzz, with custom hand drawn Sharpie design.

    September 25, 2010
  • Hirsute Pachyderm

    A four knob Si Fuzz clone. With custom Sharpie design.

    September 25, 2010
  • Eyeball Fuzz

    Here’s a Fuzz Face with custom 60s eyeball design in sharpie. This is a Si/Ge hybrid Fuzz face with a blend cap on the input.

    September 25, 2010
  • Ugly Face in neon tufts

    Here’s an Ugly Face in a neon tufted fur.

    September 25, 2010
  • So my wife says she needs an auto wah…

    To which my first reaction is to say, in my best thundering voice, “No wife of mine will be sounding like Jerry Garcia!”. Of course I suppress this urge with practiced aplomb. Six years of marriage and I can pin my tongue between my molars with only a slight grimace. Anyway, at this point I’m…

    September 22, 2010
  • Rondo AD-2300 (Left-handed version)

    I wanted something like an SG, and that meant the Epiphone G-400 for my price range. But then I’d be buying pickups and tuners that I’d only want to replace ASAP; wasn’t there an affordable guitar that might not need immediate upgrading? The Agile AD-2300 seemed like it could be that guitar.

    September 20, 2010
  • Joe’s New Guitar

    Playing electric guitar left-handed makes for a limited choice among production models – especially on a limited budget. I wanted something like an SG, and that meant the Epiphone G-400 for my price range. The Agile AD-2300 (http://www.rondomusic.net/photos/electric/ad2300nat1aleft.jpg) has similar specs and quality set neck similar weight, neck, and electronic controls and some differences it’s…

    September 20, 2010
  • Fuzzy Elephant

    Here’s a clone of the Zvex Wooly Mammoth. Came out pretty good, sounds good too. I used strip board layout here: http://www.freestompboxes.org/viewtopic.php?f=7&t=4&start=40 It’s about halfway down the page. I modified it to move the parts closer together. My layout ended up being 17 holes wide which fit in the box a little better. I used…

    September 19, 2010
  • Fuzz Face for Joe part 2

    Here’s Fuzz Face wired up and stuffed in a “B” sized box. This box is from 4Site electronics. Great finish and excellent screws much better than the Taiwanese boxes that are commonly available.

    September 19, 2010
  • Fuzz Face For Joe

    A few pictures of a Fuzz Face I made for a Joe. Turns out Joe hadn’t heard of the Fuzz Face. So I thought I make one for him. This one uses a Silicon 2n3906 for Q1 and a Germanium transistor for Q2. The Germanium transistor is a Chinese model not sure what the number…

    September 18, 2010
  • The Mouse by Lectrosonics

    I found this on the street some years ago. I dug it from under my desk today and took some pictures. Not sure what to do with it. I assumed it was broken since it was on the street.Not sure how to test this. Looks like it has two rechargeable batteries inside, with a jack…

    September 16, 2010
←Newer Posts Older Posts→

Super-Freq

Proudly powered by WordPress