RunOffGroove UBE Screamer

This is another great RunOffGroove project. It’s a unique twist on the classic Ibanez Tube Screamer. The UBE Screamer replaces the op-amps and transistor stages in the Tube Screamer circuit with inverters from a 4049UBE hex inverter.

I built this from a PCB I designed. The board is project on OSH Park. Check out the build Docs below. I used a black powder coat enclosure from Tayda electronics a red anodized dress nut and red anodized aluminum knobs from Lovemyswitches. I used the desktop mill to engrave the labels and logo through the powder coat.

Build your own!

Check out the build page for links to PCB Boards parts list and wiring diagram.

Read the build post here for PCB and parts: http://www.super-freq.com/ube-screamer-pcb-v1-1/

What does it sound like?


Posted

in

,

by

Comments

One response to “RunOffGroove UBE Screamer”

  1. […] UBE Screamer v2 inverts the blended signal to keep that and the clipped signal in phase. I also added a trim pot to adjust the blend amount. […]

Leave a Reply to New PCB Day – Super-Freq Cancel reply

Your email address will not be published. Required fields are marked *