Super-Freq

Category: Projects

  • Casualty 4 Phaser MKII

    Just tested this one again. My mistake the shape pot is working. It seems to me that the Width pot seems to square off the LFO wave form as it is turned up. With Width all the way up the LFO seems to produce more of a square wave.

  • Casualty 4 Phaser working

    Here’s an image of the Casualty 4 Phaser. Wired everything up. After figuring out that I had forgotten to connect the ground wire from the jacks to the board everything seems to be working. Initial observations. The Shape pot seems to do nothing. The Width pot seems shape the soft triangle into a trapezoidial square…

  • Omnidrive

    Here’s a project that I built up some years ago. This never found it’s way into a box. I dug it out and decided to try and box it up. Difficult with the number of switches and knobs. I think I have a viable plan to shoehorn it into a BB sized. box. This is…

  • Saffron Squeeze

    Here’s a PCB ready for boxing. This is basically a well tuned Ross clone. The original was made by Way Huge. This, Saffross, is clone made from a layout by MarkM over at DIYStompboxes.

  • Flatline

    I had wanted build a compressor for a while now. But had never actually gotten around to actually making one. A few months ago I etched and soldered a a Saffron Squeeze, which is a Ross clone. Somehow I had not actually finished this before I found stripboard layout for John Hollis’ Flatline, which jumped…

  • Casualty 4 Phaser

    Here’s interesting phaseshifter idea I found over at Circuit Workshop. The Casualty 4 is an OTA based phase shifter with two modulated stages and two fixed phase shift stages. This looks like a pretty interesting project. Looks like you can fit this in a B sized box but there doesn’t seem to be enough room…

  • Ghost wah

    Here’s a Wah probe work alike. Thought this would be a fun build. Someone gave it a good review over at DIYStompboxes so I etched up two boards. just got the parts in the mail and soldered the last parts into the board last night. Here’s a picture of the populated board. This still needs…

  • Termolo-Matic X

    This is the Tremolo-Matic X from Stompboxology. I’m in the process of building this for “Jonny” who I met at the last DIY Swap meet. He gave me this box to put it in.This project is coming together nicely.

  • Ugly Face for Steve

    Here’s an Ugly Face I built. I used PnP for the design on top. The transfer was a imperfect. But mostly worked. I’d really like to find a reliable toner transfer that works on these metal boxes.

  • Sycophant

    Here’s my take on the SHO. With crackle free knob. Adjust the value of C3 to create a range boost.

  • MosFet Range Booster

    Here’s a quick idea for a MosFet Range Booster.

  • What’s this?