Tag: James tone stack
-
The Sultan v1.1
Heres an update to the Sultan. Read about my error in the first version of the pcb here. I made a mistake and the jacks grounds were not grounded on the first version. I ordered an updated board from PCBWay.com to move this project out of the prototype phase. This was my entry in the…
-
Mother Fuzz
This is Mic Testers Big Muff Plus. It’s a Big Muff with a JFET input and output stage, and a James control in place of the BMP tone control. The JFET input creates a higher input impedance the on the original Big Muff which prevents treble loss. Schematic Q1 is a high impedance input before…
-
Summon Fuzz a bigger muff
This is Mic Tester’s 21st Century Big Muff. Its the standard big at it’s heart but updated. It uses an op-amp for the input and output stages, a James tone stack, and adds an interesting gain control to the clipping stages along with a diode lift switch for the first stage. I’m a Big Muff…
-
The Sultan
The Sultan is my first entry to the End of Days Fuzz Challenge. Based on the fuzz Face with a Bass and Treble tone control similar to tone controls used on Orange and Matamp amps. The Fuzz Face is a classic circuit. There are many Fuzz Face variants out there that sound great. The classic…
-
Box of MOSFET
Rock Box! I was talking to a friend about distortion boxes and the Box of Rock came up. Which got me thinking, I’d never heard one before, and Z Vex always makes good stuff. I found a schematic in the usual place. It looked like a pretty easy build. The Box is basically two pedals…