Doom Bloom (Fuzzhugger clone)
Built with PedalPCB.com PCB good range of heavy overdrive through distortion and fuzz tones. I built three of these and put this on my Reverb Shop.
Mitchell
UBE Screamer by RunOffGroove
This UBE Screamer by RunOffGroove.com is a unique twist on the venerable Ibanez Tube Screamer TS-808. It replaces the op-amps and transistor stages with a single hex inverter using an inverter in place of each op-amp and transistor. This has…
Ugly Face on OSH Park
Just published the Ugly Face v 1.1 to OSH Park. Built and tested, it works well! This is classic DIY project, it’s almost a rite of passage for new DIY stomp box enthusiasts. The Ugly Face is more of a…
Vulcan V1.2
Here’s a Vulcan V1.2 circuit it adds reverse polarity protection, and ground pads for input and output jacks. These are available on OSH Park. Order some boards and follow the build guide to build your own Vulcan. Vulcan On OSH…
Parentheses Fuzz (EQD Life clone)
Vulcan v1.1
Vulcan pcb built up. This is version 2.
Vulcan v1.1 PCBs
Vulcan PCB. This is a great sounding overdrive by Joe Davisson.
DIY LFO, Sampls & Hold, Stepped voltage generator, and Noise
Some old fracrack synth modules. The last is a Blacet Mixer Processor. The others are DIY. These DIY modules are 2 x 8 step sequencers. These are barebones they don’t have any quantization or even LEDs for the steps. These…
Milling a PCB
effectpedal: Making PCBs on the Othermill. Designed in Eagle. I played with the trace size. The default traces in the bantamtools DRC is really small. The 8mil traces are easily damaged.
Pile of PCBs
Building some ugly faces
Vulcan by Joe Davisson
This is Joe Davisson’s Vulcan overdrive. Starting with a prototype board made at home with the Othermill, then turned this into a board from OSHPARK. Boxed up and is working well. This is an interesting overdrive with a couple unique…
Electric Druid Digi-Delay
Digidelay. This is a 4 second digital delay with a tap tempo and hi and low pass.