PCB Template Drilling guide
I have been getting a lot requests for a drilling template. So here it is at long last. This drilling template may not be super accurate. Be sure to drill the initial holes a little smaller and check alignment against…
Mitchell
The Next board?
I’m down to about 30 of the original PCBs. I’m thinking about doing another run if there’s interest. I’m also thinking about creating another board. Same layout as the first but it would include traces for an effect with the…
Ugly Face simple blend mod
Here’s a simple mod that adds a blend pot to the Ugly Face.
Distort-o-Matic XI
This is an interesting distortion effect with an octave and wah like tone control. I redrew this schem from an issues of Stompboxology.
Punch In the Face
Here’s another unique design by Tim Escobedo.
Minibooster
This is Jack Orman‘s Minibooster.
FET Driver
This is Tim Escobedo‘s FET Driver.
Jinx
This is another fine little Distortion by Tim Escobedo. I think this sounds pretty good. The sound can go from mildly distortion/overdrive to over the top almost metal. It can also get some splatty fuzz tones and a soft attack.
Push Me Pull You
This is Tim Escobedo‘s Push Me Pull You. It’s an octave up with an interesting design. Using an NPN PNP pair.
Psychtar
Another very original design by Tim Escobedo. This an octave up with a sitar like sound.
Titan Boost/Octave
This is design by John Hollis. It’s a booster that uses an inductor to generate a massive boost. It also has a switchable octave up. The boost sound is very warm and clear. The octave has a nice tone also.…
Swollen Pickle
This is Way Huge Swollen pickle clone I made. This is basically a Big Muff with using a 14 pin DIP that contains 4 transistors. The tone control also has a pronounced mid scoop compared to the original Big Muff.…